How to Flash CM13 in Zuk Z1

DISCLAIMER : The method illustrated below has been tested on my Zuk Z1 and worked perfectly fine. If anything goes wrong with your device, I am not responsible.

Before Flashing CM13 in your Zuk Z1 there are some requirements.Please check if your device fulfills all the provided requirements.

Requirements :

1) At least 70% charge.

2) ADB & Fastboot Drivers Installed

3) Unlocked Bootloader.

4) Recovery Installed.

5)  Type-C USB cable

6) A PC/Laptop

Also Check :-

How to install CM14 ROM on Zuk Z1

How to install Resurrection Remix ROM on Zuk Z1
How to install Nuclea ROM on Zuk Z1

How to install ZUI 2.5 ROM on Zuk Z1
How to install Bliss Pop ROM on Zuk Z1
How to install Mokee ROM on Zuk Z1

Lets Begin...

WARNING : FLASHING A ROM WIPES ALL YOUR DATA SO BACKUP EVERYTHING BEFORE PROCEEDING AND FOLLOW THE STEPS STRICTLY OTHERWISE YOU MAY BRICK YOUR PHONE. DO NOT FLASH ROM WHILE CONNECTED TO A CHARGER !

Steps:-

1) Download CM13 file and extract its content somewhere in your Laptop or PC
2) Go to mobile settings > Developer Options > Advanced Reboot (enable it)
3) Hold power button and choose 'Recovery' under Reboot option.
4) Select Wipe option and choose Advanced wipe.
5) Check Dalvik cache, Cache, System, Data, Internal Storage and swipe to wipe.
6) Connect Zuk Z1 to computer and PC will recognize it as MTP
7) Copy the extracted content of CM13 in Zuk Z1 and disconnect the phone
8) Choose Install from the recovery screen and select "cm-13......ham.zip" now select Add more zips and select the "open_gapps....zip" and swipe right.  Wait for 2-4 min.
 Note : All the other zips other that these two and "capps...zip" are different mod. They are optional. If you want to install then you can else leave it.
9) Now go to Mount from recovery screen and check System
10) Choose Install from recovery screen and now select "capps...zip".

Congratulations !!
First Boot may take 2-5 min..


video tutorial :-